- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
新-高温电阻率测试仪
-
高温绝缘电阻率测试仪
-
石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
121A1-热刺激电流测...
-
121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
121-体积表面电阻率测...
-
新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高电压电流值小电流值检验仪(耐电孤检验仪)-(折算机调整)
High voltage low current tester (arc resistance tester) - (computer control)
厂商品编码称:耐电弧试验机
Product name: electric arc resistance tester
的产品应用:NDH-A
Product model: NDH - A
需要满足标准规定:GB/T 1411-2002《固态物接地材质耐高低平工作电流电弧释放释放的检验》(就是指IEC 61621-1997)及ASTM D495等标准化的规定要求方案产生的,并非常符合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
通常可用条件及实用功能:
本检查机是是以用途于直流无刷电机、电气产品和家装电气产品等行业中的焊工用塑胶、硅橡胶胶和隔热漆等隔热相关装修材料的耐弧光使用能评选,主用来混合物隔热相关装修材料如:塑胶、胶片、硅橡胶、白云母、陶瓷厂家、玻璃窗、隔热油、隔热漆、瓦楞纸板等媒介的耐弧光使用能检查;
本试验检测机由算起机调控行驶,也可以表明在当下科学试验状况及科学试验时间段,科学试验结束了之后并包存在当下科学试验数据源,并可word打印.标进行实验检测结果。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 超声波焊接机为内外一体机结构设计,下面为使用系统软件,顶部为试验装置箱。
2 本设备采用了*新智慧操作技術,经过选程序流程图(IEC或ASTM)可系统自动进行测试,并在网吧手机连接电脑提示 可靠性试验过程中和成果。
3 **机械性能保持良好,抗不干扰本事强,测评定位精度提高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 脉冲通断时光不确定度:高于 ±10ms
2 调压器数量:2kVA
3 额定负载试验装置交流电压:12.5kV
4 现场实验电阻值准确度:±3%
5 直流电压保持精度等级:±10% 电流量校正精准度:1.5%
6 电极材料对试板水压:(0.5±0.05)N
7 电极建材建材:钨棒
8 电极材料距离感:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 运行生活环境水温:(23±2)℃
10 利用场景对温度湿度的:(50±5)%
11 供电:220V±5% 50Hz
12 检验 的办法: 国家标准下载/美标/10 mA 接连/20 mA 联续/30 mA联续/40 mA连着
13 耐压试验流程下面的:
| 环节段 | 电弧焊接瞬时电流 mA | 电弧放电通断期限s | 各软件段定期的时间s | 疲劳试验总事件s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 维持通 | 60 | 240 | |
| 5 | 20 | 多次通 | 60 | 300 | |
| 6 | 30 | 连着通 | 60 | 360 | |
| 7 | 40 | 多次通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序列号 | 名号 | 总量 | 微信备注名 |
| 01 | 耐弧光软件检测仪 | 每台 | |
| 02 | 电极片系统 | 五套 | |
| 03 | 金属电极支架 | 一系列 | |
| 04 | 电源线缆线 | 一台 | |
| 05 | 等电位连接放** | 一枝 | |
| 06 | 电压电流毫安表 | 单台 | |
| 07 | 手机测控app软件 | 一整套 | |
| 08 | 试件架 | 一枝 | |
| 09 | 参比电极长距离标准单位块 | 2块 | |
| 10 | 斜度基准块 | 2块 | |
| 11 | 陶瓷制品片 | 2片 | |
| 12 | 喷墨直接佳能打印机 | 1台 | 厂家 |
| 13 | 折算机 | 1台 | 产品品牌 |
| 14 | 选择讲解书 | 1份 | |
| 15 | 良好率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 产品的规格:
NDH-A 耐弧光疲劳试验仪-微机的控制
NDH-B 耐电孤疲劳试验仪-手触屏掌控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!