- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
121A-绝缘电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
121A1-热刺激电流测...
-
落球回弹试验仪,介电击穿强度测定仪:121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高交流电压小电流量现场实验仪(耐电弧放电现场实验仪)-(计算公式机有效控制)
High voltage low current tester (arc resistance tester) - (computer control)
的产商品各称称:耐电弧试验机
Product name: electric arc resistance tester
厂品主要参数:NDH-A
Product model: NDH - A
满足了规则:GB/T 1411-2002《混合物隔绝素材耐高降低工作电流弧光自放电的试验台》(同等IEC 61621-1997)及ASTM D495等规范的让开发手工制造的,并适用IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
重点适用人群标准及技能:
本实验设计机是决定应用以马达、电气产品和家庭用的电气产品等业的高压电工用塑胶制品、硅橡胶胶和电隔绝电阻漆等电隔绝电阻建筑食材的耐焊弧焊接耐腐蚀性考核评价,主用以粉状电隔绝电阻建筑食材如:塑胶制品、贴膜、硅橡胶、黑云母、淘瓷、窗户玻璃、电隔绝电阻油、电隔绝电阻漆、厚纸板等物质的耐焊弧焊接耐腐蚀性检测;
本进行测试室检测机由估算机操作进行,就能够体现某一进行测试的状态及进行测试耗时,进行测试结速后并维持某一进行测试统计资料,并可打印文件.基准实验报告单报告单。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为上下左右合一架构,中下部为操作流程系统的,上面为疲劳湿热试验箱。
2 本成品分为*新智能化调节技木,顺利通过进行过程(IEC或ASTM)可定时做好检验,并在笔记本电脑软件显视试验检测具体步骤和成果。
3 **耐腐蚀性不错,抗干挠作用强,测量控制精度大。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧焊接通断時间测量误差:高于 ±10ms
2 调压器容积:2kVA
3 电机额定功率可靠性试验电阻:12.5kV
4 经过多次实验发现的电压表面粗糙度:±3%
5 电流值把控的精密度:±10% 交流电预估gps精度:1.5%
6 电级对试件各种压力:(0.5±0.05)N
7 参比电极用料:钨棒
8 探针间距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 选择自然环境温湿度:(23±2)℃
10 便用室内环境室内温度:(50±5)%
11 电源模块:220V±5% 50Hz
12 试验台 方案: 行业标准/美标/10 mA 间隔/20 mA 连续不断/30 mA连着/40 mA陆续
13 耐压环节如下所述:
| 源程序段 | 电弧焊接工作电流 mA | 脉冲通断精力s | 各执行程序段一直时间段s | 耐压试验总的时间s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 接连通 | 60 | 240 | |
| 5 | 20 | 连着通 | 60 | 300 | |
| 6 | 30 | 间断通 | 60 | 360 | |
| 7 | 40 | 反复通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 号码 | 标题 | 用量 | 备注名称 |
| 01 | 耐电孤公测仪 | 一架 | |
| 02 | 工业系统 | 几套 | |
| 03 | 探针支架 | 每套 | |
| 04 | 供电电览 | 一整套 | |
| 05 | 接地装置放** | 一只 | |
| 06 | 瞬时电流毫安表 | 一个 | |
| 07 | PC测控游戏 | 一种 | |
| 08 | 试板架 | 1支 | |
| 09 | 探针间隔要求块 | 2块 | |
| 10 | 层面标淮块 | 2块 | |
| 11 | 卫浴陶瓷片 | 2片 | |
| 12 | 喷墨彩打机 | 1台 | 公司 |
| 13 | 计算出来机 | 1台 | 厂家 |
| 14 | 选择解释书 | 1份 | |
| 15 | 合格证书证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 商品型号规格:
NDH-A 耐弧光校正仪-微机的控制
NDH-B 耐电孤检验仪-触屏屏掌控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!